Pixco GE-1 AF Confirm Pro Lens Mount Adapter - Nikon Lens to Canon EOS Camera

Programming configuration:
1. Set the maximum aperture in the lens.
2. Set the desired aperture in the camera.
3. Focus and measure the object, when the focus is achieved.
4. Adjust the lens aperture to the same desired aperture as the camera settings.
5. Press the shutter button and take the picture.

The ring has THREE modes of configuration:
Mode 0: enter the maximum aperture of the lens.
Mode 1- Enter the focal length of the lens.
Mode 2- Enter the micro focus adjustment of the lens.
Turn the aperture dial to a specific aperture value and press the shutter button to enter the desired setting mode.

Note:
Although it can be physically connected, the automatic iris, autofocus, and other functions do not work properly when using this adapter. You must use stop mode when measuring, since the lens does not have the ability to have its aperture controlled by the body of the camera. The added microchip (or dandelion chip) allows the confirmation function of focus with EOS digital bodies, which helps you focus even in the dark. You can shoot in manual or open priority mode.

Compatible with:
Canon 5D Mark IV, 80D, 1300D (T6 / X80), 5DS (R), 760D (T6s / 8000D), 750D (T6i / X8i), 7D Mark II, 5D Mark III, 5D Mark II, 5D, 7D, 70D , 60D, 50D, 40D, 30D, 100D (SL1 / X7), 700D (T5i / X7i), 650D (T4i / X6i), 600D (T3i / X5), 1200D (T5 / X70), 550D (T2i / X4) , 500D (T1i / X3), 450D, 400D, 350D, 300D, 1100D, 1000D.

It does NOT work with the 30, 30V and 33V and 1D series.